| Model |
|
Specification |
|
| Warranty |
6(Month) |
Appearance |
|
 Product Name:
|
|
Leather-coated curing agent
|
|
Use:
|
Applications Industry: Water leather finishes; water-based coatings and inks; textile and dyeing industry; high-grade furniture and wood flooring paint; water-based pressure-sensitive adhesive, to improve the solvent-based polymer patience.
● In the water-based paint in the wooden floor fight to improve its water resistance, alcohol, detergent-resistant, resistant to chemicals and abrasion resistance.
● In the water-based industrial paint can improve the water resistance, alcohol, anti-adhesive.
● In the vinyl coating can reduce the migration of plasticizers, increase Fog sex.
● sealant in mud in the water to improve its wear resistance.
● to improve the water system in the general non-porous substrate on the adhesion.
● to improve the solvent-based polymer patience.
● to improve the water-based ink water-resistant and detergent-resistant properties.
● Water-based printing coating to improve water-resistance, anti-viscosity, and temperature resistance.
● leather coating to improve water resistance, washing resistance, chemical and high temperature degree of performance.
|
|
Package:
|
|
5KG / plastic drum, 25KG / drum, 200 kg / barrel
|
|
Store
|
Placed in cool, ventilated, dry place, if the storage temperature is too high for too long, there will be discoloration, gel, and damage to deterioration.
|
|
Character:
|
Curing Agent CLX-100 is a 100% curing agent, by 1-3% by adding water-based acrylic latex or polyurethane dispersion of its water resistance, chemical products, high temperature and in particular the adhesion on the substrate have clear improvement, CLX-100 cross-linking reaction at room temperature, but there are effects of temperature and spray or baking process also good.
Benefits:
Chinese brand products, the technical indicators in the domestic similar products, in a leading position. Integration of the company's results of scientific and technological R & D center, combined with our many years of international trade, a comprehensive information superiority.
|
|
Performance:
|
Type ring nitrogen-based curing agent
Appearance clear yellow liquid
Solid content 1% W / W is greater than 99
Viscosity Brookfield (25 ° C) 200mPa.s
PH (25 ° C) 8.5 ~ 10.5
Density (20 ° C) 1.08Kg / L
Stability (20 ° C) for six months
Water resistance (20 ° C) is greater than 100%
|
|
Usage:
|
Carefully disposed of and to avoid direct contact with skin and eyes. Should pay special attention when using the spray mouth, nose and inhaled, with masks, operate and use CLX-100, the best openings and under the conditions of operation of protection devices to prevent the inhalation of volatile gases.
The proposed formula:
● In most cases, whenever the amount of carboxyl group and 0.6 equivalent of F-0082 can get the best response to the improvement of results, but some system requirements for cross-linking agent with equivalent responses.
● In general, cross-linking all of the acrylic or polyurethane dispersions be 2% or 3% of the CLX-100 (by weight)
● CLX-100 should be in the varnish, paint and ink prior to use to join, because of its excellent miscibility, so you can can be used by hand mixing. Join the best method: first CLX-100 is miscible with water 1:1 and then join the system.
● Water-based formula by adding CLX-100 will gradually hydrolyzed, the mixture should be used within 3-5 days. However, hydrolyzate of peace with the polymer emulsion film had no adverse effect, while adding a certain amount of CLX-100 cross-linking reaction may be restored.
● CLX-100 solvent-polymer systems can improve overall performance, but must be used within 5 days, because within two weeks, the viscosity tends to increase and may form a gel.
|
|
Safty Notice:
|
● CLX-100 is limited to the industrialized production, industrial producers, such as formulators, professionals and trained workers. If the equipment is safe and in accordance with instructions for operational use, we can guarantee the safe use of the product.
● CLX-100 without any government approval can be used for non-direct contact with food packaging coatings and ink containers.
|
|
