| Model |
|
Specification |
|
| Warranty |
6(Month) |
Appearance |
|
 Product Name:
|
|
Water-based curing agent
|
|
Use:
|
In the water-based paint in the wooden floor fight to improve its water resistance, alcohol, detergent-resistant, resistant to chemicals and abrasion resistance.
● In the water-based industrial paint can improve the water resistance, alcohol, anti-adhesive.
● In the ethylene-based coatings can reduce the migration of plasticizers, increase Fog sex.
● Cement Sealant in Water to improve its wear resistance.
● to improve the water system in the general non-porous substrate on the adhesion.
● to improve the solvent-based polymer patience.
● to improve the water-based ink water-resistant and detergent-resistant properties.
● Water-based printing coating to improve water-resistance, anti-viscosity, and temperature resistance.
● leather coating to improve water resistance, washing resistance, chemical and high temperature degree of performance.
|
|
Package:
|
|
5 kg / drum, 25 kg / drum, 200 kg / drum
|
|
Store
|
|
Placed in cool, ventilated, dry place, if the storage temperature is too high for too long, there will be discoloration, gel, and damage and degeneration.
|
|
Performance:
|
Cross-linking agent is a 100% active content of the ring nitrogen-based cross-linking agent, by 1-3% by adding water-based acrylic latex or polyurethane dispersion of its water resistance, chemical products, high temperature and in particular on the substrate a significant improvement of adhesion, he cross-linking reaction at room temperature, but there are warm spray or baking process a better effect.
Physical properties:
Type
Ring-N-type cross-linking agent
Appearance
Pale yellow clear liquid
Solid content 1% W / W
More than 99
Viscosity Brookfield (25 ° C)
200mPas
PH (25 ° C)
8 ~ 10.5
Density (20 ° C)
1.08kg / L
Stability (20 ° C)
Six
Water resistance (20 ° C)
More than 100%
Solubility
In acetone, xylene, isopropyl alcohol, N-butyl nitrate, the card must be one, Ding Jika must be one completely dissolved.
|
|
Usage:
|
● This product is a three-curing agent agent functional groups with hydroxyl groups of polymer cross-linking reaction occurs (equivalent number of 166)
● In most cases, whenever the amount of hydroxyl and 0.6 equivalent of this product you can get the best response to the improvement of results, but some system requirements for cross-linking agent with equivalent responses.
● In general, cross-linking all of the acrylic or polyurethane dispersions be 2% or 3% of the product (by weight)
● The product should be varnish, paint and ink oil prior to use to join, because of its excellent miscibility, so it can be used by hand mixing. Join the best method: first 1:1 This product is miscible with water and then join the system.
● Water-based formula to add this product will slowly hydrolyzed, the mixture should be used within 3-5 days. However, hydrolyzate of peace with the polymer emulsion film had no adverse effect, while adding a certain amount of cross-linking reaction of this product may be restored.
● The product can improve the solvent-based polymer systems overall performance, but must be used within 5 days, because within two weeks, the viscosity tends to increase and may form a gel.
|
|
Safty Notice:
|
● This product is limited to the industrialized production, industrial producers, such as formulators, professionals and trained workers, if the equipment is safe and in accordance with instructions for operational use, we can guarantee the safe use of the product.
● This product is not approved by any government can be used for non-direct contact with food packaging coatings and ink containers.
● indirect use of this product and food packaging inks and coatings, test results depend on different requirements.
● careful disposal and to avoid direct contact with skin and eyes. Should pay special attention when using the spray mouth, nose and inhaled, with masks are operational use of the product, preferably in the vents and under the conditions of operation of protection devices to prevent the inhalation of volatile gases.
|
|
