上海英禄化工有限公司
    Shanghai Yinnol Chemical Co,Ltd.
 Make favorite  Mail entrance  Employee entry  
  021-24205860
   2025-8-14  Thursday
Yinnol: The supplier of adhesives, crosslinkers ,special additives and decorative honeycomb panel,etc.
 
Profile
PVC adhesion promoter-Yinnol
PVC adhesion promoter


DetaSheet   Make Favorite   Contact


Model Specification
Warranty 6(Month) Appearance

Product Name:
PVC adhesion promoter
Use:
This product is applied to enhance adhesive strength between the PVC paste resin and polyester cloth, nylon cloth, cotton cloth. It is mainly used in manufacturing PVC belt, PVC tarpaulin, PVC advertising cloth and other products.  It is easy to use with high adhesion.
Store
With the drum sealed package, specification: 15 kg / drum. 

This product should be hermetically stored at 5-40 ℃, ventilated, cool, dry place; low-temperature conditions would give rise to higher viscosity of the product which cause it hard to mix artificial, so should try to avoid this product contacting with alcohol, water and other products. 
Usage:
Spraying the PVC coating adhesion promoter on the surface of cloth, then in Burkina PVC paste resin coated surface, and then go to 100 ℃ drying Road to pre-plasticize, and then into the baking Road 150-180 ℃ to full plasticized. 

PVC promoter mixed with the PVC paste resin. PVC paste resin at 3-8% of the PVC to add accelerator to stir evenly. In the mixing process, preventing overheating caused by increased viscosity of PVC paste resin. Well mixed PVC paste resin as primer, uniform mixing apply on the surface of cloth and went to 100 ℃ or so pre-bake Road plasticization. Again in the pre-plasticizing of PVC surface, roll coated with a layer of PVC did not increase adhesion promoting agent for PVC paste resin, into the baking Road 130-160 ℃ full plasticization. (Note: PVC paste resin should be a good mix that with the use, preferably within half an hour to 1 hour one-time run out.) 

Adhesive properties: peel strength of PVC, polyester fabric> = 190N, 5cm, PVC / nylon fabric> = 200N/5cm, PVC / nylon fabric> = 200N/5cm. 
Safty Notice:
This product is on the eyes, skin, respiratory tract stimulation, operation should bring rubber gloves and glasses to prevent contact with skin and eyes. Plasticization bake Road or Breath devices must meet the exhaust device, to prevent inhalation of the respiratory tract in the oligomer 


Same Type



  Related Application:


  中文版  English
    HOME
    Products
    Projects
    Contact Us
 

 
Shanghai Yinnol Chemical Co,Ltd.  All Rights Reserved  , 
 website:www.yinnol.com,沪ICP备10003241号,www.beian.miit.gov.cn,沪公网安备 31011702000842号,http://www.beian.gov.cn/