| Model |
|
Specification |
|
| Warranty |
6(Month) |
Appearance |
|
 Product Name:
|
|
Water-based foam glue
|
|
Use:
|
This product applies to:
Senior sofa foam and foam, foam and leather, textile fabrics, etc. adhesion;
Simmons mattresses in the foam and the foam, foam and leather, textile fabrics, etc. adhesion;
Car seat in the foam and the foam, foam and leather, etc. adhesion;
adhesion between the Materials of furniture and other industries
This product is unique in that:
Green environmental protection product, completely harmless to human body;
With a convenient spray;
Solvent-free, non-toxic, tasteless, non-formaldehyde, no toluene;
Non-flammable and easy transportation.
It has been widely used in developed countries, and now as a new type of green environmental protection product has just appeared in the Chinese market, fresh environment, human health benefits, it is bound to have a wider market prospects
|
|
Package:
|
|
Sealed package with the drum 15kg / drum
|
|
Store
|
|
Sealed deposited in the temperature 5 - 30 ℃ between the cool and dry place. Because the product is low or high temperature conditions, prone to emulsion-breaking and failure, need to be avoided.
|
|
Character:
|
This product is truly green products, non-formaldehyde, no benzene, does not contain organic solvents, security, zero concern; imported raw materials, the German technology, quality and first-class all you want bonding adhesive.
|
|
Performance:
|
Item
Solvent-based glue
Water-based foam glue 750
Appearance
Light yellow brown yellow
Milky
Solids
"30% of
"45%
Viscosity
SBS-type 100CPS the following
CR-type 300CPS the following
300-600CPS/25 ℃
Solvent Name
Organic solvents
Water
VOC
"70% of
0
Odor
Solvent odor
Tasteless
Tack
4 hours after the biggest rally
48 hours after the biggest rally
Spraying of
From 50-80cm
From 30-40cm
Drying Time
Pinch edges: 1 minute
PVC Leather: 1 minute
Thick: 2 ~ 3 minutes
Pinch edges: "3 minutes
PVC leather: 4 ~ 5 minutes
Thick: 4 ~ 5 minutes
Paste the number of repeated
3
2 times, for multiple spray thick
Holding stick time
After drying 30 'within the
Within 1 hour after drying
Gun Specifications
Small Gun
Designated
Product of mobility,
Means: can continuously proceed to the next process.
What species can be
Sub-plant, varieties, technology and some other expectations.
Swivel: Some factory paste boards - Pinch edges - set cover
Sofa: with wooden stand before the back - pinch edges - set cover
Heat
Hem, sticky bit thick-skinned bump 50 ℃ were OK
Direct OK
Single spray of
Spray volume should be more because as
The best choice for double-sided glue
Spray volume should be more Caixing
Comparison with the resin content
1
Solvent-based glue to 1 / 3
Specifications:
Appearance
A white viscous liquid
Solids
Than or equal to 45%
Major components
Polychloroprene, resins, etc.
Density
1.05 - 1.1 G/CM3
Viscosity
10 CP (at 25 ° conditions)
Chemical properties:
This product is non-flammable product, skin, eyes, respiratory tract have a certain stimulus. In the process, the wear masks, should avoid contact to prevent inhalation of spray mist to the airways in; come into contact with glue hand washing with soap.
Peel strength:
Greater than 8 N / mm
Polyurethane foam / polyurethane foam: surface damage.
Polyurethane foam / fabric: polyurethane foam surface damage.
Temperature:
Is greater than 75 ℃ (temperature curing agent can be added to reach 110 ℃).
|
|
Usage:
|
|
This product uses special equipment for spraying glue, pressure 3-5 kg/cm2, sizing capacity 10-100g/m2. First, the glue sprayed on the surface of materials such as foam or cloth surface, at room temperature (usually in the case of more than 10 ℃), cool and set 5-30 minutes, cool and set the time varies depending on the temperature. Then, two kinds of materials, pressurized paste together.
|
|
