| Model |
|
Specification |
|
| Warranty |
6(Month) |
Appearance |
|
 Product Name:
|
|
Water-based glue
|
|
Use:
|
Advanced fabric sofa, high-grade foam and foam pillows, foam and leather, textile fabrics, etc. adhesion;
Simmons mattresses in the foam and the foam, foam and leather, textile fabrics, etc. adhesion;
Car seat in the foam and the foam, foam and leather, etc. adhesion;
Chair furniture, office screens and other materials, the adhesion between the.
|
|
Package:
|
Iron sealed package 15 kg / barrel
|
|
Store
|
|
Sealed deposited in the temperature 5 - 30 ℃ between the cool and dry place. Because the product is low or high temperature conditions, prone to emulsion-breaking and failure, need to be avoided.
|
|
Character:
|
This product is truly green products, non-formaldehyde, no benzene, does not contain organic solvents, odorless, zero VOC, zero safety concerns; imported raw materials, the German technology, quality and first-class, strong viscosity, heat resistance particularly good, sticky All you want to glue together, high-end export products will use glue.
This product is unique in that:
Green environmental protection product, completely harmless to human body
With a convenient spray
Solvent-free, non-toxic, tasteless, non-formaldehyde, no toluene
Non-flammable and easy transportation
It has been widely used in developed countries, and now as a new type of green environmentally friendly products have just appeared in the Chinese market, fresh environment, human health benefits, it is bound to have a wider market prospects.
|
|
Usage:
|
This product uses special equipment for spraying glue, pressure 3-5 kg/cm2, sizing capacity 10-100g/m2. First, the glue sprayed on the surface of materials such as foam or cloth surface, at room temperature (usually in the case of more than 10 ℃), cool and set 5-30 minutes, cool and set the time varies depending on the temperature. Then, two kinds of materials, pressurized paste together.
|
|
Safty Notice:
|
First, pre-construction, first check the spray gun function is intact, if water should be excluded in advance.
Second, the construction site should be open windows and doors to ensure that the site is well ventilated.
Third, the construction took place away from the fire and the prevention of static electricity.
Fourth, clean the surface of the material, without grease, dust or other debris.
Fifth, the nozzle facing the material surface, uniform spraying, requirements:
1, the nozzle should be 45 degrees to maintain the surface material is better;
2, the nozzle from the material surface to about 0.5 meters is better;
3, spray gun air pressure should be transferred to the normal requirements 6-8 kg;
4, uniform fan-shaped spray glue spray fog, fan angle of about 45 degrees;
5, spray glue layer to evenly cover the material better, not too thick layer;
7, spraying, the spray gun should be uniformly smooth movement, not plot glue, no shortage of rubber;
8, uniform spray, place 1-5 minutes to bond, or to layer non-stick hand shall prevail;
9, adhesive, when appropriate pressure will lead to good bonding results.
10, some special materials or processes need to layer dry, then heat and pressure bonding, which can be adjusted according to customer requirements and glue;
11, do not spray when the spray gun should be cleaned;
12, poor spraying effects:
(1) layer is too po, easily lead to inadequate tack.
(2) layer thick, will increase the drying rate will also result in product plastic, affecting adhesion;
(3) layer uneven, missing plastic, resulting in some part of the bounce phenomenon.
|
|
