Model |
|
Specification |
|
Warranty |
6(Month) |
Appearance |
|
Product Name:
|
PVC stabilizer
|
Use:
|
This product is applied to enhance the PVC paste resin and polyester cloth, nylon cloth, cotton cloth adhesive strength, mainly used in manufacturing PVC belt, PVC tarpaulin, PVC advertising cloth and other products. It is simple, use less and high adhesion
|
Store
|
Plastic barrels sealed package, specification two kinds: 15kg / drum 50 kg / barrel
This product should be hermetically stored at 5-40 ℃, ventilated, cool, dry place; low-temperature conditions would give rise to higher viscosity of the product which cause it hard to mix artificial, so should try to avoid this product contacting with alcohol, water and other products .
|
Usage:
|
PVC adhesion promoting agent T-838 mixed with the PVC paste resin. In the PVC paste resin to add 3-8% of the PVC adhesion promoting agent T-838, to mix evenly. In the mixing process, to prevent overheating caused by increased viscosity of PVC paste resin. Well mixed PVC paste resin as primer, uniform mixing apply on the surface of cloth and went to 100 ℃ or so pre-bake Road plasticization. Again in the pre-plasticizing the PVC surface, roll coated with a layer of PVC did not increase promoter of PVC paste resin, into the baking Road 130-160 ℃ full plasticization. (Note: PVC paste resin should be a good mix that with the use, preferably within half an hour to 1 hour one-time run out.)
Adhesive properties: peel strength of PVC, polyester fabric> = 190N, 5cm, PVC / nylon fabric> = 200N/5cm, PVC / nylon fabric> = 200N/5cm
Whether the product needs to be added to the PVC paste resin, my office"s proposal was to be tested by the technical staff, according to the actual results before deciding.
|
Safty Notice:
|
This product is on the eyes, skin, respiratory tract stimulation, operation should bring rubber gloves and glasses to prevent contact with skin and eyes. Plasticization Hung Road or Breath devices must meet the exhaust unit to prevent inhalation of the respiratory tract in the.
|
|