| Model |
|
Specification |
|
| Warranty |
6(Month) |
Appearance |
|
 Product Name:
|
|
Water-based green glue
|
|
Use:
|
1.Adhesion for high-level leather sofas, fabric sofas in the foam and high foam, foam and leather, textile fabrics, etc.
2. Adhesion for Simmons mattresses, pillows and foam and foam, foam and leather, textile fabrics, etc.
Car seat in the foam and the foam, foam and leather, etc. adhesion;
3. Adhesion for office furniture swivel chairs, screens and other materials.
|
|
Store
|
Sealed package with the drum 15 kg / barrel
Sealed deposited in the temperature 5 - 30 ℃ between the cool and dry place. The product in low or high temperature conditions is prone to emulsion-breaking and failure, so it needs to be avoided.
|
|
Character:
|
This product is the green environmental products, non-toxic, tasteless, non-formaldehyde, no benzene, does not contain heavy metals, security, zero concern; imported raw materials, the German technology, quality and first-class, good heat resistance, viscosity privileged, you can glue all the Want bonding
Green product
With a convenient spray
Solvent
Tack High has several advantages.
It has been widely used in developed countries, and now as a new type of green environmental protection product has just appeared in the Chinese market, fresh environment, human health benefits, it is bound to have a wider market prospects
Performance indicators:
Appearance: A white viscous liquid
Solids : Than or equal to 45%
Major components: Polychloroprene, resins, etc.
Density : 1.05 - 1.1 G/CM3
Viscosity: 10 CP (at 25 ° conditions)
Chemical properties:
This product is non-flammable product, skin, eyes, respiratory tract have a certain stimulus. Wear masks In the process, avoid contact to prevent inhalation of spray mist to the airways wash hand with soap if come into contact with glue.
Peel strength: Greater than 8 N / mm
Polyurethane foam / polyurethane foam: surface damage.
Polyurethane foam / fabric: polyurethane foam surface damage.
Temperature:
Is greater than 75 ℃ (temperature curing agent can be added to reach 110 ℃).
|
|
Usage:
|
This product uses special equipment for spraying glue, pressure 3-5 kg/cm2, sizing capacity 10-100g/m2. First, the glue sprayed on the surface of materials such as foam or cloth surface, at room temperature (usually in the case of more than 10 ℃), cool and set 5-30 minutes, cool and set the time varies depending on the temperature. Then, pressure together this two kinds of materials.
1. pre-construction, first check the spray gun function is intact, water should be excluded in advance.
2. the construction site should open windows and doors to ensure that the site is well ventilated.
3, the construction took place away from the fire and the prevention of static electricity.
4. clean the surface of the material, without grease, dust or other debris.
5. the nozzle facing the material surface, uniform spraying, requirements:
(1) the nozzle should be 45 degrees to maintain the surface material is better;
(2) the nozzle from the material surface to about 0.5 meters is better;
(3) spray gun air pressure should be transferred to the normal requirements 6-8 kg;
(4) uniform fan-shaped spray glue spray fog, fan angle of about 45 degrees;
(5) spray glue layer to evenly cover the material better, not too thick layer;
(6) spraying, the spray gun should be uniformly smooth movement, not plot glue, no shortage of rubber;
6, uniform spray, place 1-5 minutes to bond, or to layer non-stick hand shall prevail;
7, adhesive, when appropriate pressure will lead to good bonding results.
8, some special materials or processes need to layer dry, then heat and pressure bonding, which can be adjusted according to customer requirements and glue;
9, do not spray when the spray gun should be cleaned;
10, poor spraying effects:
(1) layer is too thin, easily lead to inadequate tack.
(2) layer is too thick, increase the drying rate will also result in product plastic, affecting adhesion;
(3) layer is uneven, missing plastic, resulting in some part of the bounce phenomenon.
|
|
