| Model |
|
Specification |
|
| Warranty |
6(Month) |
Appearance |
|
 Product Name:
|
|
Water-based all-purpose adhesive
|
|
Use:
|
Senior sofa foam and foam, foam and leather, textile fabrics, etc. adhesion;
Simmons mattress in the foam and the foam, foam and leather, textile fabrics, etc. adhesion;
car seat in the foam and the foam, foam and leather, etc. adhesion;
furniture and other industries in the adhesion between materials.
This product is unique in that:
green environmental protection product, completely harmless to human body
have a convenient spray
solvent-free, non-toxic, tasteless, non-formaldehyde, no toluene
is not flammable, easy transportation
Tack many advantages of higher
It has been widely used in developed countries, and now as a new type of green environmentally friendly products have just appeared in the Chinese market, fresh environment, human health benefits, it is bound to have a wider market prospects.
|
|
Package:
|
|
Sealed package with the drum.
|
|
Store
|
|
Sealed deposited in the temperature 5 - 30 ℃ between the cool and dry place. Because the product is low or high temperature conditions, prone to emulsion-breaking and failure, need to be avoided.
|
|
Character:
|
|
This product is truly green products, non-formaldehyde, no benzene, does not contain organic solvents, security, zero concern; imported raw materials, the German technology, quality and first-class all you want bonding adhesive.
|
|
Performance:
|
Item
Solvent-based glue
Water-based glue 710
Appearance
Light yellow brown yellow
Milky
Solids
"30% of
"45%
Viscosity
SBS-type 100CPS the following
CR-type 300CPS the following
300-600CPS/25 ℃
Solvent Name
Organic solvents
Water
VOC
"70% of
0
Odor
Solvent odor
Tasteless
Tack
4 hours after the biggest rally
48 hours after the biggest rally
Spraying of
From 50-80cm
From 30-40cm
Drying Time
Pinch edges: 1 minute
PVC Leather: 1 minute
Thick: 2 ~ 3 minutes
Pinch edges: "3 minutes
PVC leather: 4 ~ 5 minutes
Thick: 4 ~ 5 minutes
Paste the number of repeated
3
2 times, for multiple spray thick
Holding stick time
After drying 30 'within the
Within 1 hour after drying
Gun Specifications
Small Gun
Designated
Product of mobility,
Means: can continuously proceed to the next process.
What species can be
Sub-plant, varieties, technology and some other expectations.
Swivel: Some factory paste boards - Pinch edges - set cover
Sofa: with wooden stand before the back - pinch edges - set cover
Heat
Hem, sticky bit thick-skinned bump 50 ℃ were OK
Direct OK
Single spray of
Spray volume should be more because as
The best choice for double-sided glue
Spray volume should be more Caixing
Comparison with the resin content
1
Solvent-based glue to 1 / 3
Instructions for use:
First, pre-construction, first check the spray gun function is intact, if water should be excluded in advance.
Second, the construction site should be open windows and doors to ensure that the site is well ventilated.
third, the construction took place away from the fire and the prevention of static electricity.
Fourth, clean the surface of the material, without grease, dust or other debris.
Fifth, the nozzle facing the material surface, uniform spraying, requirements:
1, the nozzle should be 45 degrees to maintain the surface material is better;
2, the nozzle from the material surface to about 0.5 meters is better;
3, spray gun air pressure should be transferred to the normal requirements 6-8 kg;
4, uniform fan-shaped spray glue spray fog, fan angle of about 45 degrees;
5, spray glue layer to evenly cover the material better, not too thick layer;
6, spraying, the spray gun should be uniformly smooth movement, not plot glue, no shortage of rubber;
6, uniform spray, place 1-5 minutes to bond, or to layer non-stick hand shall prevail;
7, adhesive, when appropriate pressure will lead to good bonding results.
8, some special materials or processes need to layer dry, then heat and pressure bonding, which can be adjusted according to customer requirements and glue;
9, do not spray when the spray gun should be cleaned;
10, poor spraying effects:
(1) layer is too po, easily lead to inadequate tack.
(2) layer thick, will increase the drying rate will also result in product plastic, affecting adhesion;
(3) layer uneven, missing plastic, resulting in some part of the bounce phenomenon.
|
|
Safty Notice:
|
This product is non-flammable product, skin, eyes, respiratory tract have a certain stimulus. In the process, the wear masks, should avoid contact to prevent inhalation of spray mist to the airways in; come into contact with glue hand washing with soap.
|
|
